![background image](http://html1.mh-extra.com/html/omega/hhm27/hhm27_manual_4006658011.webp)
9
6. Use caution when measuring 10 amps on A range for 60s, please waiting
for 10 minutes for next measurement of 10 amps for safety reason.
Resistance Measurements
1. Set the Function/Range switch to
W
/
position.
2. Remove power from the equipment under test.
3. Connect the red test lead to the "V
W
" jack and the black test lead to the
"COM" jack.
4. Touch the probes to the test points. In ohms, the value indicated in the
display is the measured value of resistance.
WARNING
The accuracy of the functions might be slightly affected, when exposed to
a radiated electromagnetic field environment, eg, radio, telephone or
similar.
Diode Tests
1. Set the Function/Range switch to
W
/
position.
2. Remove power from the equipment under test.
3. To toggle the
W
/continity/diode modes, press SELECT switch.
4. Touch probes to the diode. A forward-voltage drop is about 0.6V (typical for
a silicon diode).
5. Reverse probes. If the diode is good, 1 OL is displayed. If the diode is
shorted, ".000" or another number is displayed.
6. If the diode is open, 1 OL is displayed, in both directions.
7. If the junction is measured in a circuit and a low reading is obtained with both
lead connections, the junction may be shunted by a resistance of less than
1k
W
. In this case the diode must be disconnected from the circuit for
accurate testing.
Содержание HHM27
Страница 1: ...OMEGA HHM27 Digital Multimeter...