![background image](http://html1.mh-extra.com/html/omega/hhm19f/hhm19f_manual_3999755010.webp)
8
Diode Tests
1. Connect the red test lead to the "V
W
" jack and the black test lead to the
"COM" jack.
2. Set the Function/Range switch to the "
" position.
3. Turn off power to the circuit under test.
4. Touch probes to the diode. A forward-voltage drop is about 0.6V (typical for
a silicon diode).
5. Reverse probes. If the diode is good, "OL" is displayed. If the diode is
shorted, ".000" or another number is displayed.
6. If the diode is open, "OL" is displayed in both directions.
7. If the junction is measured in a circuit and a low reading is obtained with both
lead connections, the junction may be shunted by a resistance of less than
1k
W
. In this case the diode must be disconnected from the circuit for
accurate testing.
Capacitance Measurements
1. Set the Function/Range switch to the desired capacitance range.
2. Never apply an external voltage to the
sockets. Damage to the meter
may result.
3. Insert the capacitor leads directly into the
socket.
4. Read the capacitance directly from the display.
Содержание HHM19F
Страница 1: ...OMEGA HHM19F Digital Multimeter...