![background image](http://html1.mh-extra.com/html/omega/hhf1001a/hhf1001a_user-manual_737261019.webp)
5.1 End Device Configuration
The wireless transmitter (HHF1001x-W) has the following default settings:
Data Transmission time interval: 2 seconds
Unit ID Address: 01
You can change the transmission interval and the unit ID address of the wireless
transmitter using this software application. Connect the wireless transmitter
to the PC USB port with the cable provided. Run the End device configuration
software. The software will recognize the transmitter and allows the settings
to be changed. You can set the data transmission interval from 1 to 60 seconds.
You can have up to 48 wireless transmitters sending data to one wireless
receiver. Figure 5-4 shows the End Device Configuration software establishing
communication with HHF1000. Figure 5-5 shows the Options menu where you
can change the Unit ID and the data sampling rate.
Figure 5-4. Establishing Communication With HHF1000 Screen
Wireless PC Communications
5
5-3