![background image](http://html1.mh-extra.com/html/omega/hhf1001a/hhf1001a_user-manual_737261018.webp)
Standby (SB) yellow indicator light - The yellow indicator light marked “SB” on
the front of the receiver will blink continuously during normal operation. This
indicates that the receiver is in Standby mode and is waiting for incoming data
from the wireless transmitter.
Power (PWR) Green indicator light is for power indication.
Figure 5-2. General And Mounting Dimensions
Figure 5-3. FCC Warning Label
The HHF1000 series comes with an additional Windows based user application.
This program, TC Central, is used to monitor and log air velocity and air
temperature wirelessly from the HHF1000 device. In addition, from the
"Tools" menu, you can select "Configure End Device...", to Run the End Device
Configuration Wizard. You can set the unit ID (Transmitter Address) and data
transmission interval using this feature.
Wireless PC Communications
5
5-2
ANTENNA
USB
I/O
9–24 Vdc
OMEGA ENGINEERING, INC.
Stamford, CT 06907
UWTC SERIES
WIRELESS RF RECEIVER
2.4 GHz
omega.com
Made in U.S.A.
-
+
!
TX
RX
SB
PWR
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference;
2) This device must accept any interference received,
including interference that may cause undesired
operation.
FCC ID: OUR–XBEEPRO
IC #4214A–XBEEPRO
F
®
64 (2.5)
89 (3.5)
DIMENSIONS mm (in)
o 3.6
(0.140)
o 7.5
(0.295)
76 (3.0)
Mounting Hole Center Line
!
F
FCC ID: OUR-XBEEPRO
IC #4214A-XBEEPRO
Made in U.S.A.
This device complies with Part 15 of
the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation.