Omega HH931T, Руководство пользователя

Страница: 18 / 49

Operating Instructions
3-3
14 Active statistic
15
Real-time Clock
When viewing statistics, time elapsed since start of statistics collection
When reviewing saved data, alternates between displayed data time and date stamp
16 Real-time clock mode indicator
17
Flashing: Bluetooth connection pairing mode
Solid On: Bluetooth connection active
1 T2 Probe Offset available on model HH932T only.
2 Model HH932T only.
Figure 4: LCD Display Description
The LCD can display error information about the current measurement, as shown in Figure
5.
D
ISPLAY
D
ESCRIPTION
OPEn No thermocouple probe is connected
-Or-
The applied temperature is greater than the maximum temperature for the
selected thermocouple type
-Ur-
The applied temperature is less than the minimum temperature for the
selected thermocouple type
Figure 5: LCD Error Indications
Setup Menu
Key designators followed by (1.5s), e.g. (1.5s) , indicate that the key should be
pressed and held for 1.5 seconds, then released to access the desired function.
Measurement settings are configured in the Setup Menu. Press (1.5s) to access the Setup
Menu. From within the Setup Menu, press to step through the user-definable parameters
and the keys to advance or reverse the selected value for the active parameter. The
active parameter value will flash on the display.
To enter the Setup Menu, press (1.5s) . The active parameter value will flash on the display.
To differentiate between the date and real-time clock parameters when the date parameter
is active, the CLK indicator is lit. When the real-time clock parameter is active, the CLK
indicator is flashing.
Press to save a setting and step to the next parameter. Press to save a setting and
exit the Setup Menu. Press to disregard unsaved changes and exit the Setup Menu. If no
key is pressed for 10 seconds, the current configuration is saved and the instrument will exit
the Setup Menu.