GENERAL INFORMATION
These versatile impeller flowmeters are available in 3/8”,
1/2”, 3/4”, and 1” nominal pipe sizes with female NPT
threads. They employ jewel bearings to allow for very low
minimum flow rates and superior life.
The
FPR300, with a body of polypropylene, is an economical
choice for metering water or low corrosion fluids. The lens
cover is available in a choice of materials: acrylic for visual
flow indication of low-corrosion fluids; polypropylene
when more corrosion resistance is needed. The standard
rotor assembly is PVDF with tungsten carbide shaft. The
O-ring is EPDM.
The
FPR310
offers greater chemical resistance with a PTFE
body and cover, PTFE-coated FKM O-ring, and standard
PVDF/ceramic rotor assembly.
The pulse output of these meters is compatible with many
different types of controls, including a full range of Omega
rate displays and controls. The Omega DPF-143 and
DPF-144 provide flow rate and total flow indication. The
DPF-144 also includes 4-20 mA output capability. The FMG-
1000-MAW may be used for blind 4-20 mA transmission.
Features
FPR300/310 SERIES INSTRUCTIONS
Page 4
omega.com
FPR300
Thread-in Sensor, Field Replaceable,
6–24 Vdc Pulse
18’ Sensor Cable
Standard Acrylic Top with Clear
Removable Lens Assembly
(optional polypropylene top
without clear lens)
Polyproylene Body
Female NPT Ports
Hex Screws
Internal
•
Jewel Bearings—Ruby Ring and Ball
•
PVDF/Tungsten Carbide Rotor Assembly
(PVDF/Ceramic or
PVDF/Silicon Carbide optional)
• EPDM O-Ring (FKM or PTFE-coated FKM optional)
Thread-in Sensor, Field Replaceable,
6–24 Vdc Pulse
18’ Sensor Cable
PTFE Body and Top
Female NPT Ports
Screws with Hex Nuts
Internal
•
Jewel Bearings—Ruby Ring and Ball
•
PVDF/Ceramic Rotor Assembly
(PVDF/Silicon Carbide
optional)
•
PTFE-coated FKM O-Ring
(FKM or EPDM optional)
FPR310
