Omega Excalibur AL-1920-EDP, Руководство по эксплуатации, Страница: 14 / 28

14
Multi-Car Operation & Vehicle Profiles
mULTI-CAR OPERATIOn
The controller can operate up to 2 different systems� When controlling 2 systems, it
will receive all status updates on the currently selected vehicle profile and will receive
only trigger alerts for the 2nd vehicle� You can switch from one car to the other at any-
time as well as choose a unique image and name for each vehicle� Use the following
steps to change vehicle profiles as well as select the vehicle image and name.
1) Access SCREEn 3 : press the HOME button, tap the
screen, press the down arrow twice�
2) Press the “CAR1” icon (pictured to the left)� You will then
see the “CAR 1 NAME” screen�
3) Program the name you desire (up to 16 characters)
BLUE arrow: Backspace
YELLOW arrow: Scrolls through numbers,
letters, and symbol screens
4) Press the gREEN arrow to save the name�
nOTE: Programming the name for CAR2 is the same
procedure, except you will need to press the CAR2 icon
in step 2.
PROGRAmmInG THE VEHICLE nAmE
SELECTInG CAR1 OR CAR2
Once the vehicle names have been programmed for both vehicle profiles, you can
simply switch between the two as needed� To do so:
1) Tap the desired vehicle’s icon (CAR1 or CAR2) on SCREEN 3 as if you are going
to change the name�
2) Then, press the gREEN arrow
icon to select that profile.
CAR 1 CAR 2
SELECTInG THE VEHICLE ImAGE
You can select a different vehicle image for each vehicle profile if desired. The
controller is preloaded with 3 different vehicle images, a CAR, TRUCK, and SUV� To
change the image, follow these steps:
1) Make sure you are already in the desired vehicle profile
(CAR1 or CAR2)�
2) Access SCREEN 3
3) Press the VEHICLE IMAgE icon (pictured to the right) to
view the image select screen�
4)
Press the gREEN UP ARROW to change the image�
5) Press the FOLDER icon to save your selection�