Omega DRST-UR Скачать руководство пользователя страница 5

Страница: 5 / 40

Warning

WARNING

This device is designed for connection to hazardous electric voltages.

Ignoring this warning can result in severe personal injury or mechanical

damage. To avoid the risk of electric shock and fire, the safety instructions of

this manual must be observed and the guidelines followed. The specifications

must not be exceeded, and the device must only be applied as described

in the following. Prior to the commissioning of the device, this manual

must be examined carefully. Only qualified personnel (technicians) should

install this device. If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be impaired.

GENERAL

WARNING

Until the device is fixed, do not connect hazardous voltages to the device.

The following operations should only be carried out on a disconnected

device and under ESD safe conditions:

• Dismantlement of the device for setting of DIP-switches

and jumpers.

• General mounting, connection and disconnection of wires.

Troubleshooting the device.

Repair of the device and replacement of circuit breakers must be done by

A/S only.

HAZARD OUS

VOLTAGE

WARNING

To keep the safety distances, the relay contacts on the device must not be

connected to both hazardous and non-hazard ous volt ages at the same time.

SYSTEM 4000 must be mounted on a DIN rail according to DIN 46277.

INSTALLATION

WARNING

Do not open the front plate of the device as this will cause damage to the

connector for the display/programming front Omega DRSL-DISPLAY. This

device contains no DIP-switches or jumpers.

Содержание DRST-UR









































Результаты поиска

Содержание DRST-UR

Отзывы:

Похожие инструкции для DRST-UR

Бренды по названию

Популярные бренды

Omega DRST-UR, Руководство пользователя

Результаты поиска

Содержание DRST-UR

Отзывы:

Похожие инструкции для DRST-UR

Бренды по названию

Популярные бренды