11
3.4 Sensor Input Connections (Continued)
To connect the input to the unit, attach the thermocouple probe to
the 2-pin female connector that is supplied with the unit. Refer to
Figure 3-4
for wiring instructions and
Table 2-1
for wire colors.
Plug the female connector into the P3 male connector at the
rear of the meter.
Figure 2-2
shows the location of the P3 connector on the meter.
Figure 3-4. Thermocouple Connector Wiring (P3)
1
2
– TC INPUT
Screws
underneath
+ TC INPUT
