![background image](http://html1.mh-extra.com/html/omega/cmdp-series/cmdp-series_user-manual_4010322008.webp)
8
Airflow adjustments
There are air 6 holes in the middle of the outer shell. 2 large holes, 2 medium, and 2 small. The holes allow the airflow
to the mirror (where the measurement is made).
To adjust the airflow to the mirror, the Phillip set screw must be removed. Once removed, twist the outer shell to the
correct hole for airflow and then re-install the set screw to hold the outer shell in place.
For example: if the larger airflow hole has been selected and your signal is constantly oscillating after the red light is in a
steady state. You might want to select a smaller hole to slow down the airflow to the mirror. If that doesn’t work, try to
clean the mirror.
Set screw
Outer shell
Airflow holes
Содержание CMDP Series
Страница 12: ...9...