background image

/21

Specifi c Information for calibre 3220

OMEGA SA  

WORLD SERVICE ORGANIZATION  

GT-19-C-024-E - C - 3220

6.0 Setting the time

The instructions below must be followed to achieve 

perfect synchronisation of hands:

1.  Firstly, adjust the small second: pull the crown to 

position 2; the small second at 3 o’clock stops. It is 

advisable to stop the small second at 60 seconds.

2.  Turn the crown forwards or backwards to set the 

minute hand. For the minute and small second hand 

to 

synchronise perfectly, the minute hand must be 30 to 

45 seconds ahead on the desired index (this 

procedure is specific to the Cal. 3220). The train 

energy is transmitted to the hands via three wheels. 

When setting the time, the gearing end play must be 

compensated for by advancing the minute hand by 

30 to 45 seconds.

3.  Push in the crown when the reference time matches the 

set time of the watch.

1 2

6.1 Chronograph Operation

Start

Stop

Remise à zéro
(uniquement après arrêt)

Important:

Chrono hour and minute counters do not jump but instead mouve continnesly while the chrono is running.

Reset (only after stopping)

Содержание 3220


































Отзывы: