5
user Programmable Features
Feature #1 Remote Start Run Time
10 minutes
(press t
he b
rake pedal 1 time to program) -
DEFauLT
5 minutes
(press t
he bra
ke pedal 2 times to program)
15 minutes
(press t
he br
ake pedal 3 times to program)
20 minutes
(press t
he br
ake pedal 4 times to program)
This feature sets the period of time that the engine will run after being remotely
started. If the engine is not stopped by controller/transmitter command or a safety
circuit violation, the engine will automatically stop upon the expiration of the selected
time period.
Caution: The remote engine starting feature should NEVER be
used when the vehicle is parked in an enclosed structure or garage.
This group of User Programmable Features are all accessed as a group in the first
level of features’ programming. These features have a direct affect upon the sys-
tem’s operations, so the programming and operation of each are described.
Feature #2 Steady/Flashing Lights During Remote Start
Steady
(press the brake pedal 1 time to program)
- DEFauLT
Flashing
(press the brake pedal 2 times to program)
This Feature configures the operation of the vehicle’s parking lights during the
remote start operation. The default setting turns on the parking lights during remote
start; the other setting flashes the parking lights on and off during remote start.
This group of Installer Programmable Features are all accessed as a group in the
second level of features’ programming. These features have a direct affect upon the
system’s operations related to the installation and vehicle type
aND SHOuLD ONLy
BE CHaNGED By THE INSTaLLER!!!
Feature #1 Remote Start activation
1 button pulses
(press the brake pedal 1 time to program)
2 button pulses
(press the brake pedal 2 times to program)
- DEFauLT
3 button pulses
(press the brake pedal 3 times to program)
4 button pulses
(press the brake pedal 4 times to program)
This feature allows you to choose the number of pulses required on the White/Blue
activation wire to activate the remote start feature. All of the settings must occur
within a 5 second window of the previous pulse.
Feature #2 Engine Detection method
Tachless Hi
(press the brake pedal 1 time to program)
- DEFauLT
Tachless Lo
(press the brake pedal 2 times to program)
Tach wire
(press the brake pedal 3 times to program)
Data Tach
(press the brake pedal 4 times to program)
Crank Only
(press the brake pedal 5 times to program)
This feature selects the method in which the remote start monitors the engine’s run-
ning condition in remote start mode.
“Tachless Hi”
sensitivity mode has an associated base starter output time duration
(see installer feature #5) and monitors the vehicle’s voltage level to determine if the
engine is running. This setting looks for a voltage increase of 0.3v after cranking.
“Tachless Lo”
sensitivity mode operates like the “Tachless Hi” setting but
Installer Programmable Features
