8
STANDARD CONNECTION (TYPE #5)
Door Lock
Switch
Remote Key-
less Module/
BCM
AL-100-DP
Driver Door
Actuator
Passenger
Door Actuator
Rear Door
Actuators
Green & Blue not used
Gray - Driver Motor Unlock
Pink - All Door Motor Lock
Brown - All Door Motor Unlock
White - Ground
6 Pin Arm & Disarm Harness Wiring
PARKING LIGHT OVERRIDE CONNECTION
Door Lock
Switch
Remote Key-
less Module/
BCM
AL-100-DP
Gray - All Door Motor Unlock
Pink - All Door Motor Lock
Brown - Hazard/Parking Light
White - Connect with
Pink or Brown*
Driver Door
Actuator
Passenger
Door Actuator
Rear Door
Actuators
Hazard / Parking
Lights
Green & Blue not used
* If the Hazard/Parking lights flash when Locking with the OEM remote, connect the White wire
with the Brown to the Hazard/Parking light circuit. If the Hazard/Parking lights do not flash with the
Lock operation connect the White wire with the Pink to the All Door Motor Lock circuit�
Parking Light Override Connection can be used in vehicles that flash the Hazard/Parking lights
when the OEM remote Lock or Unlock buttons are pressed�
Feature #9 Auto Learn
- Within 60 seconds of applying power to the AL-100-DP, you can
press the Lock button on the OEM remote twice to select the proper setting for feature #9� The AL-
100-DP will monitor the Pink & White input wires and automatically set feature #9 as needed and
arm upon the second Lock press� If nothing is done during this window no change will be made� At
any time you can enter programmable features to change this feature manually�
The Standard Connection can be used in vehicles that unlock only the driver’s door with the
first press of the OEM remote Unlock button.
