4
Specification
81100
Output
DC 5V / 2A for USB port
DC 12V for jumpstart port (EC5)
Input
DC 14V-15V / 1A
Charge Time
4-5 hours on 15V/1A
Capacity
11,000 mAh
Weight
13.76 oz.
Dimensions
5.79 x 2.95 x 1.14 in
Starting Current
400A
Peak Current
800 A
Suitable Engine
12V / Gasoline Engine or Diesel car
Operating Temp.
-4° F ~ 140° F (-20° C ~ 60° C)
Storage Temp.
-4° F ~ 176° F (-20° C ~ 80° C)
SPECIFICATIONS
OPERATIONAL GUIDANCE CONTINUED
OUTPUT: USB DC5V/2A
1. Use a USB connection cable to charge 5V mobile phones and other electronic products from
the USB 5V 2A output port of the host.
2. Connect the charged product to the host and then press the power switch. The power LEDs are
alight to mean the host is charging the charged product.
LED TORCH
Switch button operating cycle is as follows:
1. Press twice the power switch to start the LED torch.
2. Press once more to enter S.O.S. mode.
3. Press again to turn off the light.
Notes:
1. Before jumpstarting the engine of vehicles, make sure the blue plug of Smart Jump Start Cable
is inserted to the bottom of EC5. Otherwise maybe the poor contact fails to jumpstart vehicles
and even causes the blue plug burned.
2. If fail to jumpstart vehicles at first time, please check (1) whether the connection of the clamps
to the vehicle battery is good or not (2) whether the host power is enough or not (3) whether
the vehicle is out of order or not.
3. If the environment temperature is lower than 10°C, the vehicle engine could not start at first
time after the unit connected to the vehicle battery because this unit contains auto-reset func-
tion. Please turn the ignition switch many times to warm up the unit battery. The vehicle engine
can be started smoothly once the unit battery reaches its working temperature to output large
current. (If a vehicle needs large current, the unit has to be warned up to maximize the current
output to start the vehicle engine smoothly. This is a feature of this unit.)
Содержание 81100
Страница 16: ...16...
