background image

Lower Handle

Plug/ Oil Port

 (3/8"-18NPTF)

Cylinder

Claw

Shovel

Left Foot

Right Foot

Upper Handle

Cylinder

22910

5

10,000

26”

15.5

250

429 x 140 x 324

Model Nr.

Max.

Rim

Size (L x W x H)

Rated

Pressure

Capacity

(Ton)

c.c.

K      G

Remove the wheel from the vehicle and secure on a suitable 

work surface. 

Fully deflate the tire

, remove valve core, and 

all balance weights.

Hold and position the bead breaker under the rim flange. 

Position the claw on the inner part of the rim, with the bead 

breaker feet against the outer part of the rim.

Operate the pump to close the claw portion and simultaneously 

press against the bead surface. To stop or hold, simply cease 

pump operation.

With the claw pushing against the inner part of the rim, the 

shovel and feet push against the lateral ring and the bead of 

the tire.

Continue operating the pump until the bead separates from 

the tire rim surface.

To release, simply release the hydraulic pressure of pump by 

opening the release valve on the pump or if a treadle pump, 

actuate the release pedal.

Continue this operation around both outboard and inboard 

sides of the rim until the bead is free.

1.

2.

3.

4.

5.

6.

7.

PRODUCT DESCRIPTION

The Omega Hydraulic Bead Breaker is designed to work on most rims up to 26". It is expressly intended to be used as an aid in 

breaking the bead seal between a tire and it’s one piece wheel for the purpose of resealing bead seal, replacement of tire or 

wheel, replacing tire valve, tire tube etc. Bead breaker works directly on the bead of the tire and will not damage the tire if used 

correctly.

NEVER

 use this bead breaker on split rim / multi-piece wheel assemblies! 

DO NOT

 use this device on an inflated tire! 

Remove

 

tire from vehicle and 

deflate

 completely before attaching bead breaker to wheel.

SPECIFICATIONS

OPERATION INSTRUCTIONS

NOTE: For best result, use an approved tire bead lubricant before 

removing or installing tire on rim.

NOTE : If the above procedures can not remedy the problem, the product should be taken to a local service center for further 

examination.

Содержание 22910









Отзывы: