Omega Lift Equipment 18124C, Инструкция по эксплуатации и каталог запасных частей

Страница: 3 / 24

Figure 1 - 18124C & 18204C Nomenclature
Lift Control
Valve
Carry Handle
Air Motor
Release
Valve
Saddle
Oil Filler Screw
Quick Connector
Air Hose
Handle
Ram Plunger
Handle Sleeve
3
SPECIFICATIONS
Model Capacity
Base Size
(L x W)
Saddle
Diameter
Min. Height Max. Height
Hydraulic
Lift
Ext. Screw
18124C 12 Ton 7-7/8" x 6-1/4" 2" 9-1/2" 18-1/2" 5-1/2" 3-1/2"
18204C 20 Ton 8-1/2" x 7-1/8" 2" 9-3/4" 18-3/4" 5-1/8" 3-7/8"
!
WARNING
• Study, understand, and follow all instructions
before operating this device.
• Do not exceed rated capacity.
• Use only on hard, level surface.
• This is a lifting device only. Immediately after
lifting, support the load with appropriate means.
• Lift only on areas of the vehicle as specified by
the vehicle manufacturer.
• No alterations shall be made to this product.
• Only attachments and/or adapters supplied by
the manufacturer shall be used.
• Failure to heed these markings may result in
personal injury and/or property damage.
To avoid crushing and related injuries:
• Never work on, under or around a load supported
only by hydraulic jack.
• Always use adequately rated jack stands.
• Chock each unlifted tire in both directions.
• Do not use this device to lift, level, lower, support
nor move a house, mobile home, travel trailer,
camper or any building structure.
• Be alert and sober when using this product. Do
not operate under the influence of drugs or
alcohol.
!
WARNING
X