6-15
Table 6-3 (cont’d)
TIME MODE
KEY
DISPLAY
ACTION TAKEN
SHOWS
AND PROCEDURE
TIME
xx:xx:xx
Displays current TIME setting
1.
Press the
TIME key
. The display flashes the TIME setting you
selected just before starting the pump.
2.
Use the
UP and DOWN ARROW keys
to enter the TIME
setting you desire. As you use the
UP and DOWN ARROW
keys
, the display changes accordingly. The SECONDS scroll,
When you reach 0 or 59 seconds, the minutes setting changes.
When you reach 0 or 59 minutes , the HOURS setting
changes. Refer to Figure 6-5.
NOTE: While the pump is running, you can not use the TIME key to
toggle from SECONDS to MINUTES TO HOURS.
FLOW
RATE
TOTAL
VOLUME
xxx mL/min
or
xxx L/min
Displays actual FLOW RATE
Press the
FLOW RATE key
. The display flashes the calculated fluid
flow rate (xxx mL/min or xxx L/min).
xxx mL
or
xxx Liters
Displays cumulative TOTAL VOLUME since start
Press the
TOTAL VOLUME key
. The display flashes the calculated
volume of fluid dispensed since the pump started running (xxx mL
or xxx Liters).
TUBE ID
CALIBRATE
TUBE ID=xxx
Displays current TUBE ID
Press the
TUBE ID key
. If the red LED next to the
CALIBRATE key
is not lit, the display flashes the current TUBE ID setting. If the red
LED next to the
CALIBRATE key
is lit, the display flashes the
message “CALIBRATED TUBE!”.
CALIBRATED!
or
not calibrated
Displays calibration state
1.
Press the
CALIBRATE key
. If the red LED next to the
CALIBRATE key
is not lit, the display shows “not calibrated”.
If the red LED next to the
CALIBRATE key
is lit, the display
shows “CALIBRATED!”.
To calibrate a tube:
2.
Press the
START/STOP key
to stop the pump. The display
returns to the
STOPPED Display Mode
. For detailed instruc-
tions on “Calibrating a Tube”, refer to Section 5.5.
and
xx:xx:xx
NOTE: if you press the UP and DOWN ARROW keys, the display
shows the current TIME setting. This setting changes
accordingly as you use the UP and DOWN ARROW keys.
NOTE:
if you press the Language button, the display changes to
the next language in the sequence: English, French,
Spanish, German, and Italian.
You will not notice this change unless the display
shows something other than time. It is easier to change
languages when you watch the display change.
Language
Button
Содержание OMEGAFLEX FPU5-MT-110
