OMEGA ALTISE
TECHNICAL DETAILS AND PARTS
Model: OP408R Pedestal fan with remote control.
Power: 220-240V 50Hz, 65W.
Weight: 7kg.
Dimensions (H(max)xWxD): 1300x440x440mm
FRONT
GETTING STARTED
1. Carefully remove the parts of the appliance from the plastic bags
and the carton, and unwind the cord to its full length.
2. Assemble the base & body:
a) Remove the chrome ring from the bottom of the main body (2
philips head screws) to expose a fixing screw (take care to hold
the 2 pieces of the main body together). Slide the inner tube into
the main body and fix in place with the fixing screw. Replace the
chrome ring and fix in place with the 2 screws.
b) Place the aluminium tube over the inner tube, and fit the base
cover (small end towards the control panel) over the aluminium
tube.
c) Place onto the base and fix tightly together with the lock nut.
3. Remove the fan blade lock nut from the motor shaft and rear
guard lock nut from motor housing. Place the rear guard (hole
in the centre) on the front of the motor housing (line up with the
3 lugs, handle to top) and fix in place with the rear guard lock
nut.
4. Place the fan blades over the motor shaft (make sure the pin is
aligned correctly) and fix in place with the fan blade lock nut
(turn anti-clockwise).
5. Place the front guard over the rear guard (clear clip to the top) and clip into place at 5 points. Bring the clear clip down &
through the slot in the top of the front guard and fix in position by fully screwing in the small screw next to the clip.
6. Place the appliance onto a stable, flat and dry surface.
7. Plug the cord set into a 220-240V~A.C. 50Hz earthed electrical outlet. Turn the power on at the electrical outlet.
CONTROLS
ADJUSTMENTS:
Turn off the fan before making any adjustments. To adjust the vertical angle of the fan
blades, manually tilt the head of the fan to the desired position and start the fan.
To adjust the height of the fan, loosen the screw at the rear of the aluminium tube.
Manually adjust the height of the fan. Re-tighten the knob and start the fan.
Guard Ring
Adjustable Tube
Controls
Main Body
LED Display
Guard
Base
Fan Blade
