omega altise
3
Specifications
Model AP24MT
AP24ET
AP15ET
AP10ET
Rated Voltage
240V / 50Hz
240V / 50Hz
240V / 50Hz
240V / 50Hz
Watts
2400W 2400W 1500W 1000W
Controls
Manual Manual Manual Manual
Thermostat
Mechanical Electronic
(5-30
o
) Electronic
(5-30
o
) Electronic
(5-30
o
)
Heating Element
Sheathed heating element with aluminium diffuser (safe, silent and long-lasting)
24hr Timer
9
9
9
9
Wall Mountable
9
9
9
9
Castors
9
9
9
9
Safety Features
Safety cut-out; Control box
cover; Lockable castors
Safety cut-out; Control box
cover; Lockable castors
Safety cut-out; Control box
cover; Lockable castors
Safety cut-out; Control box
cover; Lockable castors
IP Status
IP24 IP24 IP24 IP24
Measurements
(l x h x d mm)
1000 x 440 x 105
1000 x 440 x 105
740 x 440 x 105
580 x 440 x 105
Nett Weight (kg)
8.2 8.0 6.3 4.8
Warranty
7 year repair / replacement
7 year repair / replacement
7 year repair / replacement
7 year repair / replacement
M: mechanical thermostat
E: electronic thermostat
T: timer
Assembly Instructions
Remove all items of packaging from the panel. As this
convector panel heater is designed to be wall mounted OR
freestanding please follow the below instructions according
to your choice:
TO WALL MOUNT THE PANEL
Where to install the heater?
1. Ensure the safety zones (shown in mm) are kept free
(see Figure 1).
2. The panel convector must not be installed immediately
below a wall socket. The heater must be connected to
a socket outlet or permanent terminal box at least
10cm to one side of the heater (see Figure 2).
3. If the heater is installed in the Bathroom or in a humid
area, the socket outlet or permanent terminal box must
conform to the IP24 requirement (please consult an
electrician for further details).
4. The panel convector must not be installed in a draught
likely to affect the control settings (under a ventilating
fan, etc.)
Figure 1.
Figure 2.
