Omega Altise AHPE222W Скачать руководство пользователя страница 6

 

 

OMEGA ALTISE 

 

Position the bracket on the wall in the desired position & drill holes for four mounting screws. Once the holes are 
drilled, use four screws (appropriate for the type of wall) to fix the bracket firmly in place. Check for strength. 
Carefully place the heater (slightly tilted forward) onto the hooks at the bottom of the bracket & rotate back so the 
clips fix back into their original holes.  Check that they are fixed correctly. If possible, have a second person help to 
check for alignment as the heater is attached.  The heater is now ready to connect to the mains power.  
 

 
 
 
 
 

 
 
 
 
 

 

SAFETY FEATURES 

 
1.   A thermal overload protector is built in to prevent overheating. 
2.   When an overheat temperature is reached, the heater will automatically shut off.  It can only resume operation 

when the user resets the unit (see reset instructions below). 

To reset your heater:  

1.

 

Unplug the heater and wait for 45 minutes for the unit to cool down. 

2.

 

Then, turn on the unit again and operate normally. 

 

CLEANING & MAINTENANCE 

 

WARNING:  

ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT 
IMMERSE HEATER IN WATER! 

 
With the heater disconnected from the power, clean the exterior body of the heater with a soft damp cloth. 

Always make sure that the heater is completely dry before connecting back to the mains supply. A vacuum 

cleaner can be used to clean the inlets & outlets of dust & fluff. To clean behind a wall mounted unit, the 
mounting clips can be disconnected & the heater rotated slightly forward (a 2 person job). Please make sure the 
unit is properly resecured after. 
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the heater. NEVER 
use ALCOHOL OR SOLVENTS. 
STORAGE: Store the heater with these instructions in the original packaging, in a cool, dry place. 

 

WEEE WARNING

 

   
This product should not be disposed of with household waste.  Please recycle where facilities exist and  
check with your local authority for recycling advice. 

 

 

SPECIFICATIONS 

 
MODEL 

INPUT POWER 

RATED POWER  DIMENSIONS (NO CASTORS)  WEIGHT 

AHPE152W 220-240Vac 

50Hz 

1500W 

640x400x85mm 

(WxHxD) 

5.1Kg 

AHPE222W 220-240Vac 

50Hz 

2200W 

940x400x85mm 

(WxHxD) 

7.2Kg 

 

 

Содержание AHPE222W









Отзывы: