EMD12 Installation and operating manual
www.omega-air.si
6
Safety instructions
Installation and maintenance work may only be carried out when the device is
not under pressure. To depressurize the device, close ball valve and press the
test button on device until pressure in it drops.
Installation and maintenance work may only be carried out by trained and
experienced personnel.
Installation and maintenance workers must use proper safety / protection
equipment (e.g. protection gloves, protection goggles, …)
Disconnect electrical power supply before opening the top cover of the
device.
Installation and maintenance work may only be carried out when electrical
power supply is disconnected.
Electrical work must always be carried out by qualified electrician.
Do not exceed maximal operating pressure or operating temperature range
(see data label).
Do not use the device in hazardous areas with potentially explosive
atmospheres.
Use original spare parts only.
Use the device for the appropriate purpose only.
Appropriate use
EMD series electronic condensate drain is intended exclusively for the following purpose:
Draining condensate from compressed air system (air compressors, air
receivers/pressure vessels, air dryers and air filters).
Any other form of use or one going beyond this shall be considered as inappropriate. We
shall have no liability whatsoever for any damage incurred as a result.
