ECDh-5 - Installation and operating manual
www.omega-air.si
7
Troubleshooting
Problem
Possible cause
Solution
ECD isn’t
discharging the
condensate
Condensate is freezing in pipes
before ECD drain.
Apply additional thermal
insulation to the heater and inlet
and outlet piping.
ECD is trying to
discharge but the
condensate is not
discharged
Condensate is freezing in pipes
after ECD drain.
Apply additional thermal
insulation to the heater and inlet
and outlet piping.
Despite the heater
being mounted
condensate is
freezing inside the
housing
Ambient temperature is below
-15
o
C
Apply additional thermal
insulation to the heater and inlet
and outlet piping.
Heater is not connected to power
supply
Ensure the proper electrical
connection.
Warranty exclusion
The guarantee shall be void if:
The installation and operating manual was not followed with respect to installation,
initial commissioning and maintenance.
The unit was not operated properly and appropriately.
The unit was operated when it was clearly defective.
Non-original spare parts or replacement parts were used.
The unit was not operated within the permissible technical parameters.
Unauthorized constructional changes were made to the unit or if the unit has been
opened/disassembled by an unauthorized person
The installation and operating manual was not followed with respect to installation,
initial commissioning, and maintenance.
