8. Use and maintenance manual
B01.35-B02.45
San Maurizio C.se - 15/12/2020
www.omcr.it
Fig.2
CODICE
STAFFE
CODICE
PERNI
B01.35.42500
B02.45.100
Before each lifting, handling or overturning of the die be sure about the correct insertion
of the lifting pin that has to be
ABSOLUTELY
assembled
with the safety ring
positioned
in direction of the die axis: after inserting it, be sure that the
safety ring
is misaligned in
reference to the hole so that the pin accidental extraction is avoided; check the movement
of the
safety ring
by verifying the eccentricity “E” in reference to the pin (see
Pic.2
).
WARNING
3.5
Before each lifting, handling or turnover check that the lifting brackets capacity load is in
compliance with the die weight; the maximum capacity load, the work order number, the
constructor label and the
EC conformity mark
are indelibly marked on the lifting pins and
over the lifting brackets.
NOTE:
the work order numbers of lifting brackets and pins are not
necessarily corresponding (see
Pic.3
).
WARNING
3.6
MATERIAL
MAXIMUM
CAPACITY LOAD
CONSTRUCTOR
CE MARK
PRODUCT CODE
WORK ORDER NUMBER
LIFTING PIN MARK
Fig.3
