Omcan WC-CN-0275-D, Инструкция по эксплуатации

Страница: 10 / 20

10
Operation
affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to
fluctuate.
SETTING THE TEMPERATURE CONTROL
NOTE: The temperature readout shows the actual cellar temperature, it will temporarily show the set
temperature while making adjustments, then reverts back after 5 seconds.
1. Make sure power cord is connected to a properly grounded outlet.
2. Turn power ON.
3. Set the desired temperature by pushing the + or - button.
4. Increase or decrease 1°F with each push of the + or - button.
NOTE: Temperatures may fluctuate depending on whether the interior light is ON or OFF and
depending on the position of the bottles.
CHARCOAL FILTER
Your wine cooler is equipped with a charcoal air filter to help ensure the air inside is free from odors and in
maintaining proper humidity levels. The filter icon on the display illuminates every year to remind you its time to
change the filter.
Replacing the filter: the filter is located inside your wine cooler on the back wall. Turn counterclockwise to
unlock, then remove. Replace with a new filter and turn clockwise to lock in place.
• To Reset Filter Counter: Press and hold for 3 seconds Temp Down (2) icon and Light Bulb (3)
simultaneously, until you hear a beep.
• Filter Days Remaining - Calendar Check: Press and hold for 3 seconds Temp UP (1) icon and Light Bulb
(3) simultaneously, until you hear a beep (shows the amount of days remaining).
INTERIOR LIGHT
To complement the look of your wine collection, LED lighting has been built into the wine cellar. You can also
set the intensity of the lighting.
Lights: Press 1x ON and 2x for OFF.
Light Intensity: To change the default light intensity, press and hold down the Light Bulb (3) icon for 3 seconds
to program, then use the UP (1) and DOWN (2) keys to scroll though the light intensity settings: 100%, 50%,
25%.
LOCKING AND UNLOCKING THE CONTROL PANEL
• To lock or unlock the control panel: Press and hold for 3 seconds light bulb (3) icon and power (4) icon
simultaneously, until you hear a beep. The default setting is unlocked.