Omcan WC-CN-0045-D, Инструкция по эксплуатации, Страница: 8 / 28

8
Installation
1. Remove all packaging components
Door handle, packaging base, adhesive tape used to fix accessories and protective pads should all be
disassembled. Fix the screws according to the diagram (screws are kept in the instruction bag or have
already been installed).
2. Check the accessories
Check the items in the packing box to ensure they match with the list in the instruction manual.
3. Clean unit before use
Please read the details in the cleaning section.
4. Caster adjustments
Using a spirit level, ensure that the cabinet is perfectly upright and adjust the castors if necessary.
5. Moving the cabinet
If the cabinet is moved, please wait at least 2-3 hours before reconnecting the power supply.
6. Start the cabinet
Power up the cabinet to test if it is running properly. If the ambient temperature of the room is higher than
the set temperature, the temperature inside the cabinet will start to drop. Once the cabinet is newly stocked
with bottles of wine, the thermal mass of the wine may mean that several hours will be required for the wine
to reach set temperature. This will vary, depending on the temperature of the wine and the required set
temperature.
Moving the Cabinet
Secure all shelves with adhesive tape. Place a layer of foam from top to bottom to protect the inside glass
panel from the shelves. Lock the door. Tighten the castors as far into the cabinet as possible.