Omcan RS-CN-0145S-5, Инструкция по эксплуатации, Страница: 10 / 32

10
Maintenance
Operation
• Often keep the refrigerator clean and periodical maintenance is necessary.
• Always unplug the socket before maintenance.
• Never use damaged plug or loose socket to prevent from electric shock or short circuit.
• Never flush the refrigerator. Never use alkali detergent, soap, gasoline, acetone or brush.
CLEANING
1. Clean outside.
- Moisten soft cloth in a mild detergent solution to clean the outside, and then wipe off with a dry soft cloth.
2. Clean inside.
- Remove the tray and clean with water.
- Use a soft, damp cloth to wipe the interior.
3. Turning off for prolonged periods.
- Take out all food and unplug the unit from the wall.
- Clean both the inside and outside of the fridge thoroughly and open the door to allow it to dry.
- Be careful as the glass can easily be broken.
4. Replacement of the light.
- If the LED is damaged it must be replaced by the manufacturer or their service agent.
FRONT PANEL OPERATION
1. Set temperature:
Press the “SET” button, the set temperature is displayed.
Press or button to modify and store the displayed value.
Press the “SET” button to exit the adjustment and display the cold-room temperature.
2. If no more button is pressed within 10 seconds, the cold-room temperature will be displayed.
3. Illumination: press the button, it lights; press again, it stops.
Manual start/stop defrost: press the button and hold for 6 seconds to defrost or stop defrost.
4. Refrigerant LED: during refrigeration, the LED is on; when the cold room temp. is constant, the LED is off;
during the delay start, the LED flashes.
5. Defrost LED: during defrosting, the LED is on; when is stops defrosting, the LED is off, during the delay
display of defrost, the LED flashes.
ADDITIONAL WARNING:
Caution: risk of fire. The height of the triangle in the symbol shall be at least 15mm.