Omcan PH-CN-1400-P, Инструкция по эксплуатации

Страница: 7 / 12

7
Installation
Operation
3. Read this instruction manual carefully before installation and use. Keep this instruction manual in a proper
and safe place for future use in case needed.
INSTALLATION
1. Unpack and take out both upper body and lower body together.
2. Put Lower Body up-side-down. Fix Base cover (#3) onto Lower Control Box. Then slide Base Cover (#3) ,
Base (#7) and Washer (#6) onto Base Bracket (#8) respectively, and fix it well with Screw M6*20 (#5).
3. Lay Lower Body vertically. Put Upper Body on top of Lower Body. Get the plug (#2) and power supply cord
(#10) through the holes on the center of Base Cover (#3) and Base (#7). Clip the power supply cord (#10)
with Cord Clip (#11) and fix it onto Base (#7) with Screw (#1).
4. Fix Upper Body and Lower Body with Joint Boards and Screw M6*27.
5. Fix the table (#16) with trapping screw ST4*12 (#15).
1. Plug in the unit to a socket. Make sure the power supply is same as rated.
2. Turn Switch to position “I” to switch on one heating element. Turn Switch to position “II” to switch on both
heating element. Turn Switch to position “O” to switch off the unit.
Maintenance
CLEANING
Unplug the unit before cleaning. It should be wiped with a damp cloth. Do not use a water jet or submerge the
unit in water.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
43124 PH-CN-1400-P
Patio Heater with Powder Coated Frame
and Base Cover 140cm Height 1500W
SH15140H/2