Omcan MX-IT-0025, Инструкция по эксплуатации, Страница: 7 / 16

7
Installation
INSTALLATION AND TRANSPORTATION
The machine must be installed on a flat and stable surface, easy to be cleaned and suitable to support the
load. It must be positioned to allow immediate access to all of its sides. The floor, walls and other elements of
the premises must be constructed in accordance with reference regulations for health and safety. The electrical
installation must also be performed in compliance with reference standards as indicated for use.
The machine is shipped assembled and packed in a cardboard box or other suitable materials, or laid on a
pallet and properly anchored. The machine can be loaded and unloaded using a forklift or crane. All means
used must have suitable capacity characteristics to handle the weight of the load. Handling must be performed
with utmost care, always consider the load and weight distribution of the machine.
All the operations must be performed exclusively by trained personnel, equipped with the required tools for the
related activities.
During transportation, all necessary precautions must be taken to avoid damage of the machine.
Transportation and placement at the point of use must be carried out without removing the packaging of the
machine. After reaching the workstation, remove the packaging from the machine, verify it’s integrity and place
it in the most appropriate location. Assemble the wheels (the front wheels are equipped with brakes), and verify
that the machine is steady and well leveled before proceeding with the other operations.
It is not recommended to operate the machine without the wheels being installed.
ELECTRICAL CONNECTIONS
The electrical connections must be carried out only by qualified personnel. Each operation must be carried out
after disconnecting the machine from the line.
Verify that the voltage of the electrical system matches the one required by the machine. The machine must
be connected to a manually controlled electrical device that allows separating the electrical system of the
machine from the line, when maintenance or handling is necessary. Ensure the electrical cable is free of
defects or damage during transportation and handling. After connecting the electrical cable to the plug, ensure
the direction of rotation of the bowl is the one indicated by the arrow found on the edge of the machine. If not,
contact Omcan for service.