10
Operation
Installing Mixer Attachments - MX-CN-0020-T / MX-CN-0020-G
Ensure machine is off, lower bowl to loading position. Open the Guard by pulling the handle away from
the magnetic latch. (Fig.6) Raise the attachment over the shaft, keeping note of where the notch is. (Fig.7)
Guide the notch through the path until it reaches the end and locks. (Fig.8) To remove attachment, follow the
instructions above in reverse order.
Fig.6
Fig.7
Fig.8
Installing Mixer Attachments - MX-CN-0030-T / MX-CN-0030-G
Ensure machine is off, lower bowl to loading position. Open the Guard by lifting it up towards the top of the
machine until it stops. (Fig.9) Raise the attachment through the shaft, keeping note of where the notch is.
(Fig.7) Guide the notch through the path until it reaches the end and locks. (Fig.8) To remove attachment,
follow the instructions above in reverse order.
Installing Mixer Attachments - MX-CN-0010-G
Ensure machine is off, lower bowl to loading position. Keep note of the notch on the shaft (Fig.3) and raise the
attachment over the shaft. (Fig.4) Turn the attachment to the left until you can turn no more (Fig.5) and release,
the attachment should now dip down a bit and lock in place. To Remove the attachment, follow the instructions
above in reverse order.
Fig.3
Fig.4
Fig.5
