Omcan MS-IN-0250H-R, Инструкция по эксплуатации

Страница: 5 / 24

5
Safety and Warranty
SAFETY
Please observe the following instructions for your safety:
• Carefully read all instructions before using the machine.
• The product is not intended to be used by children.
• Use the machine only if you have been properly trained and are in perfect psychological and physical
condition.
• Do not use the machine in any way other than as described in this manual.
• Install the machine in conformity to the instructions indicated in the “Installation” section.
• Install the machine in a location out of the reach of personnel not authorised to operate it.
• Stay highly concentrated when using the machine and avoid any distraction during use.
• Do not allow the machine to be used by personnel who have not read and fully comprehended the content
of this manual.
• Do not wear baggy clothing or clothing with open sleeves.
• Do not allow anyone besides the operator to approach during product cutting operations.
• Do not remove, cover or modify the tags located on the machine body and, in case of damage of these,
replace them promptly.
• Do not remove the transparent protections and do not modify or bypass the mechanical and electrical
protective devices.
• Slice only the permitted products. Do not attempt cuts on prohibited type products.
• Always keep the sliced product resting surface, the work area all around the machine and the operator floor
area clean and dry.
• Do not use the machine as a resting surface and do not place any objects on it which are foreign to normal
cutting operations.
• Do not use the slicer when, due to normal wear, the distance between the edge of the blade and the blade
protection exceeds 5 mm.
• In this case, contact the manufacturer or an Authorised Service Centre to change the blade.
• Do not use the machine with “movable” type electrical connections, with temporary or non insulated cables.
• Periodically check the condition of the power cable and the cable gland on the machine body. Replace it
promptly when necessary, requesting operation by qualified personnel.
• Immediately stop the machine in the event of a defect, abnormal operation, suspicion of breakdown,
incorrect movement, unusual noises.
• Before cleaning or carrying out maintenance, disconnect the machine from the electrical mains.
• Use protective gloves for the cleaning and maintenance operations.
• Place and remove the goods to be sliced on the sliding meat table only with the carriage completely pulled
back and with the thickness adjustment lever placed in the safety position (Fig. A).
• For movement of the meat table during cutting operations use only the manoeuvring handle located on the
arm or the product holder grip.
• Use of cutting accessories which were not provided by the manufacturer with the machine is prohibited.
• The device cannot be used without the meat table or product holder.
The manufacturer declines any direct and indirect responsibility stemming from inappropriate use,
unauthorized modifications and/or repair carried out on the machine, or use of non original accessories
and replacement parts. The machine may not be used in open areas and/or areas which are exposed to
atmospheric agents and in environments with vapors, fumes or corrosive and/or abrasive powders, with risk of