8
Maintenance
PROTECTIVE SAFETY DEVICES
For any procedures described in this section, it is necessary to remove some of the fixed protections from
their positions. The removal can only be performed by an authorized Omcan technician. At the end of the
maintenance procedures, these protections must be replaced and fastened in their original positions.
The machine must be switched off and unplugged prior to any maintenance and cleaning.
EXTRAORDINARY MAINTENANCE
In the event of any extraordinary maintenance, it can only be completed by an authorized Omcan service
technician.
CLEANING
All cleaning procedures must be started only when the machine is no longer in operation and is unplugged
from the electrical socket.
The machine, the electrical equipment and electrical components must never be submerged, sprayed, or
washed with water. Use a dry cloth to wipe these components.
Installation and Operation
AFTER EACH USE
Once the machine has been operated and is no longer in use, please do the following:
1.
Before turning off the unit, wait until the food product has finished going through the plate.
2. Turn off the machine by placing the switch to the “O” position.
3. Unplug the unit from the electrical socket.
4. Perform the cleaning and maintenance steps detailed in the “Maintenance” section.
UNBLOCK IN CASE OF OBSTRUCTION
During operation, or during the worm rotation, due to the food products being introduced with incompatible
parts (ie: bones), the machine could become blocked and cause a malfunction.
To be able to resume normal operation, the grinding group must be disassembled, and the blockage must be
removed.
