Omcan JE-ES-0028N-T, Инструкция по эксплуатации, Страница: 14 / 28

14
Troubleshooting
Maintenance stop reached. In case of cleaning, remove
juicers.
*Motor overheating. Check if any piece or part is
blocking or hindering machine turn.
Voltage input out of range. Check voltage supply.
Control fuse damaged. Replace fuse (10A) on control
board.
Full dispenser signal while
automatic shower function is being
executed.
Empty dispenser.
Orange peel cycle completed (peel
basket is full).
Empty peel basket.
*Every 10 minutes of non-stop operation of the machine takes about 15 minutes to reset the engine
temperature.
Important: to exit a “warning” state, it will be necessary to press the “stop” button. The machine will go to “stop”
status. If the machine does not exit the “warning” state when the “stop” button is pressed, it means that the
cause of the warning has not yet been resolved.