Omcan JE-ES-0028N-T, Инструкция по эксплуатации, Страница: 13 / 28

13
Troubleshooting
FAILURE CAUSE SOLUTION
The machine does not operate. Machine unplugged. Plug it to socket.
No power. Check the plug and socket.
Transparent cover misplaced. Make sure it is well placed.
Defective safe detectors. Call customer service.
Defective ON/OFF button. Call customer service.
Defective electric circuit. Call customer service.
The machine is blocked while
squeezing is in progress.
Insufficient voltage. Check that the voltage is as
indicated on the identification label.
Wrong fruit size. Check the size of the fruit is as
shown in this manual.
The machine stops every few
minutes.
Insufficient ventilation. Check that ventilation gratings are
not covered.
Insufficient voltage. Check the voltage.
The positioner is broken or bent. Misplaced drum or positioner. Make sure the pieces are well
placed.
The tap is blocked. Juice has seeds or excessive pulp. Dissemble and clean the tap as
described in the manual.
Counter increases counts wrongly. Noise or perturbations in electric
supply.
Unplug and plug machine to
electric supply. If problem persists,
unplug the machine and plug again
after a few minutes.
WARNINGS AND EMERGENCY STOPS
Warning and emergency stops are situations that require user attention.
These situations can answer to following causes:
• User security and protection.
• Equipment protection against external factors.
• User attention is required to continue a sequenced operation.
• User attention is required due to machine maintenance.
Once a warning or emergency stop is reached, machine automatically stops and enters “warning” status. In
this status, a red LED over the “stop” button will light intermittently and the corresponding warning advice will
be displayed through screen:
WARNING CAUSE ACTIONS
Front cover is not correctly
assembled. Incorrect assembly of
the automatic filter (if applicable).
Tighten the fasteners that fix the
cover to the machine casing.
Check the automatic filter
anchorage.