Omcan Item 47134, Инструкция по эксплуатации

Страница: 6 / 24

6
Safety and Warranty
• Do Not touch any of the electrical parts without having first disconnected the appliance from the electricity
supply: there is risk of electrocution.
• Do Not mix quantities that cannot be contained in the mixing drum.
• Do Not wear clothing that does not conform with the accident prevention regulations. Ask your employer
regarding safety regulations and accident prevention clothing.
• Do Not turn on the appliance if faulty or out of service. Before using the appliance make sure any
hazardous working conditions have been eliminated. If there is a fault or problem with the appliance
immediately turn it off and inform the maintenance team.
• Do Not permit unauthorized staff to use the appliance. In case of an electrical accident the first thing to do
is to pull the injured worker away from the appliance (normally in this situation the worker is unconscious).
However, be very careful as this is very dangerous. The injured worker in this situation is an electricity
conductor and touching him / her means being electrocuted. It is important to disconnect the electricity
supply by disconnecting the fuse box and if this is not possible use an insulated object or material (wooden
or PVC stick, fabric, leather, etc...)to pull the injured worker away. Immediately call the nearest casualty
department so the injured worker is admitted to hospital for treatment.
• Do Not use the appliance in environments where there is gas in the atmosphere creating a high risk of
combustion (explosion).
• Do Not repair the appliance without prior authorization.
• Always Respect the procedures for maintenance and technical assistance.
PROTECTIONS AND SAFETY FEATURES
ATTENTION
Before using the appliance make sure the safety protections are in their correct position and intact. Check they
function correctly before starting work (at the beginning of a new work shift). If there are problems contact the
maintenance team.
1. Rotor protection grille. This safety feature impedes incidental contact with the rotor (Fig. 1.8.1).
2. Micro-switch (Fig. 1.8.1).
3. Knob to lock tank.
4. Ball grip for locking the rotor in position.
ATTENTION!
Do Not for any reason tamper with the safety features.
DANGER AND WARNING NOTICES
ATTENTION
When the appliance is connected to the electricity supply do not touch any of the electronics. There is the risk
of being electrocuted. Always respect the information given on the warning notices. Non-observance can cause
injuries or even death. Make sure the warning notices are always in their correct position and are legible. If for
some reason they are missing or are illegible fix them to the appliance or replace them.
WORK POSITION
The correct work position for using the appliance is shown in Fig. 1.10.1.