Omcan HLC300, Инструкция по эксплуатации

Страница: 8 / 16

8
Maintenance
Troubleshooting
Clean the surfaces with water, alcohol or detergents that are not abrasive. Never use damaging tools to assist
in the cleaning of the machine (such as steel wool). This may cause damage to the machine. Use of non-toxic
products which will produce the best results.
PERIODS OF INACTIVITY
Should the machine be idle for a long period of time, disconnect the main wall switch and clean the machine
and its accessories thoroughly. Use food grade mineral oil (27336) to protect all the machine’s components.
This helps prevent moisture and dirt from getting inside the machine. It is advised to cover the machine with a
nylon (or similar) cloth.
When the pilot light is on, but the machine does not start, check to make sure that the handle and cover are
closed. These are the locations of the microswitches and the machine will not start if they are not correctly
fixed. In the event of other problems, turn the machine off and unplug it. Do not try to start or tamper with the
equipment. Let a qualified technician solve the problem. Contact the Omcan Service Center at 1-800-465-0324
to find a qualified technician.