Omcan HLC300, Инструкция по эксплуатации

Страница: 6 / 16

6
Operation
SETTING THE DISCS ON THE MACHINE
Rotate the knob as shown below and open the cover. First set the plastic ejecting disc (Pic. 5), then the
disc selected for the cutting. Close the cover and reverse the rotation of the handle. Use the start button to
automatically hook the discs in the correct position.
SETTING AND CUTTING THE FOOD
Lift the handle and set the food inside the product opening, then close the handle. Press the green start button
with your right hand and with your left hand, lightly push the handle downwards until food is fully used. Lift
the handle to put in more food. The machine starts automatically when the handle is closed. Repeat these
operations until all food is used. It is possible to use the two openings with a single disc. When two discs are
used for cutting sticks and match-life food, the inlet opening set over the grid must be used. The smaller round
opening is used to cut vegetables like carrots, vegetable marrows, etc.
WARNING: NEVER USE THE HAND TO PRESS DOWN THE PRODUCT, BUT USE THE
PESTLE SUPPLIED.
Pic. 6
Pic. 4 - Cover Opening Pic. 5 - Disc Position