11
Troubleshooting
Maintenance
Problem
Possible Causes
Solution
Machine does not work.
Machine is not connected to the
power source.
Connect the machine to the power
source.
The main switch is in the 0-Stop
position.
Move the switch to the I (on)
position.
No voltage in one or more phases. Check the fuses, plug and
switches.
Machine is connected to power
source but knives do not turn.
The stainless steel lid is not
closed.
Close the stainless steel lid.
The thermal protective clixon has
blown.
Let the machine cool down for a
few minutes, then switch it back
on.
Bowl turns in the wrong direction.
The phases are reversed.
Switch 2 of the 3 phases in the
power source connection.
REFERENCE
Item Number Model Number
Description
Manufacturer Model Number
10875
FP-ES-0015
Bowl Cutter 15 L / 15 QT 1700-3400 RPM
2.5 HP / 1864 W 220V/60/1
K15
19256
FP-ES-0015-T Bowl Cutter 15 L / 15 QT 1700-3400 RPM
2-2.75 HP / 1566-2013 W 220V/60/3
K15PH3
be reduced more than 1 cm from its original size. Once the knives have been sharpened, before reinstalling
them in the machine, a small space should be filed from the stop flange located in the hexagonal area (Fig. 3)
to compensate for any possible shortening of the knives. To clean the knife surfaces, use a product with anti-
corrosive properties. Always store the knives in their packaging; this will help maintain the cutting edge and it
will protect them from any accidental bumps or friction. Always transport the knives in their packaging when
possible. To adjust or move the knives always use adequate safety measures and equipment.
Содержание FP-ES-0015
