Omcan F300TCV, Инструкция по эксплуатации, Страница: 15 / 44

15
Maintenance
• Lubrication of carriage sliding guides: once a week.
• Lubrication of product grip sliding bar: once a week.
• Adjustment of motor belt tension: as required.
• Checking the power supply cord conditions and of the gland plate: from time to time.
WARNING: Maintenance must always be carried out when the machine is disconnected from the mains and if
no other position is specifically required, with the thickness control knob on ‘0’.
The following maintenance operations are to be entrusted only to personnel authorized by the manufacturer:
• Replacing the blade;
• Replacing the sharpener wheels;
• Replacing the motor transmission belt;
• Replacing electrical system components under the machine base;
• Repairing structural parts, repairing the components under the base.
BLADE SHARPENING:
Before proceeding, clean the machine accurately as explained in the previous paragraphs:
WARNING: Sharpening can be done only up to 12 mm of the blade diameter value. Beyond this value, the
BLADE MUST BE REPLACED ONLY by personnel AUTHORIZED BY THE MANUFACTURER.
Clean the blade accurately using denaturised alcohol to degrease it; Operate the graduated knob by turning it
towards the left to open completely;