Omcan CE-CN-0010-D, Инструкция по эксплуатации

Страница: 8 / 16

8
Operation
USING YOUR DEHYDRATOR
To start your dehydrator, you need to turn the power switch on, the unit will be powered then. Turn on the timer
to set a time, the fan start working. Then turn on the thermostat dial to set a desired temperature, the heating
element start heating.
CAUTION: During the dehydrating process, make sure that no metal accessory comes in contact with
the electric fan and heating elements.
CAUTION: Foods dehydrated in this unit will be hot. Wear protective hand coverings when reaching
into dehydrator to retrieve food.
TYPICAL OPERATION SEQUENCE
ACTION RESULT
Plug in your dehydrator. Power is connected but power light will go on after
turning the power switch button.
Turn on the timer dial Convection fan start working
Turn on the thermostat dial Heating element start working.
Timer reaches zero. Timer chimes.
Unload dehydrator. Product will be dehydrated/hot; use caution removing
it from the dehydrator.
TIMER
The range of the timer on this unit is 0-12 hours. Turning the timer to the "OFF" position, the dehydrating time
is over and the timer will "ding" to alert.
If you need to reset the dehydrating time while the dehydrator is in operation, simply turn the timer to a new
position. The dehydrator will reset the time according to the revised requirement without needing to be turned
off.
When the set dehydrating time has been reached, the unit will chime and the heating elements will
automatically shut off.
TEMPERATURE CONTROL KNOB
The temperature range of this unit is 85-160 degrees Fahrenheit on 120V models. This thermostatic switch
controls the temperature inside the dehydrator and helps to maintain the proper temperature during various
dehydrating applications.