Omcan BE-IT-0406, Инструкция по эксплуатации

Страница: 11 / 20

11
Maintenance
Troubleshooting
REPLACING THE FUSES
• Loosen the securing screws.
• Remove the back (A).
• Find which fuses have blown on the control unit (B).
• Change them with new ones that have the same characteristics.
• Put the back panel (A) back and fix it with the screws.
PROBLEM PROBLEM REMEDY
The machine does not start. There is no electricity. Check the general meter, the
outlet, the plug and the power
cable.
The pedal control is connected to
the machine.
Press the pedal controls.
The machine stops while it is being
used.
Fuses blown. Replace the fuses following the
instructions in Replacing the Fuses
section under Maintenance.