Omcan BB-CN-230S, Инструкция по эксплуатации

Страница: 10 / 16

10
Troubleshooting
The appliance turns on, but the
temperature is too high/low.
Too much ice on the evaporator Defrost the appliance.
Condenser blocked with dust. Call Omcan.
Doors are not properly sealed. Ensure doors are shut and seals
are not damaged.
Appliance is located near a heat
source or air flow to the condenser
is being interrupted.
Move the refrigerator to a more
suitable location.
Ambient temperature is too high. Increase ventilation or move
appliance to a cooler position.
Appliance is overloaded. Reduce the amount of containers
in the appliance.
The appliance is unusually loud. Loose nut/screw. Check and tighten all nuts and
screws.
The appliance has not been
installed in a level or stable
position.
Check installation position and
change if necessary.
The appliance is leaking water. The appliance is not properly
leveled.
Adjust the screw feet to level the
appliance.
The discharge outlet is blocked. Clear the discharge outlet.
The water container is damaged. Call Omcan.