Omcan 49115 Скачать руководство пользователя страница 7

7

Safety and Warranty

particular (but not only) of the components for transmitting motion to the sheeting rollers, drive and belt 

guide cylinders. 

- The motion transmission components are segregated by means of guards. 

- Confluence zones of movement between the belts and transmission rollers are protected by the fixed 

guards. 

The structural parts (shoulders) and guards, along with the bottom of the flour tray housing seat, act 

as fixed guards and make it impossible to reach the sheeting rollers from the sides and from above 

respectively.

3. 

Emergency stop button; when this is pressed (only to be done in cases of real necessity and never for 

stopping the machine in normal conditions) all the parts in movement are stopped and electric power to 

the motor is disconnected. To restart the machine it is first necessary to reset the button (by turning it in the 

direction indicated by the arrow on the head), and then press the enabling button.

OPENING/REMOVING THE GUARDS AND/OR DEACTIVATING THE SAFETY DEVICES IS ABSOLUTELY 

FORBIDDEN.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure 

or other damages resulting from installation in non-commercial or residential applications. The right 

is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as 

possible.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized 

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated 

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Содержание 49115





























Отзывы: