Omcan 46724, Инструкция по эксплуатации, Страница: 11 / 20

11
machine operation. Before proceeding the oven temperature must be at 350° C for roughly 60 minutes (setting
350° on the top and on the bottom as well), for an easy baking scoriae carbonization. Once the temperature
is reached, switch off the oven and wait until the temperature drops to roughly 100°C (the best temperature
for cleaning). At this stage disconnect the electric power supply. After dressing in gloves and suitable dresses
as protection from burns, open the door and with a brush in natural fiber with a long handle, proceed to a first
removal of baking fragments from the refractory stones, then take them out by a suitable vacuum cleaner. At
the end, clean the refractory stone with an humid cloth.
External cleaning of the oven
Oven external areas cleaning, external parts in stainless steel, door glass, and switch panel, must be carried
out at cold oven and at disconnected electric power supply. Use a sponge or a soft cloth, not abrasive,
slightly humidified with water or possibly with a neutral detergent not corrosive. In any case, do not use water
jets which can penetrate through the electric parts and easily damage them, as well as creating hazardous
conditions.
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
The oven doesn’t heat despite the
temperatures are correctly set. The
pilot lights of the heating elements
are off.
Main switch off (positioned on “0”). Set the main switch to position “1”.
The oven doesn’t heat despite the
main switch is on (position 1) and
the temperatures are correctly
set. The function pilot lights of the
heating elements are off.
No electric Energy in the net. Check the general contactor, the
socket, the plug, and the supply
cable.
The oven does not switch on and
the digital display is off.
Main switch off (positioned on “0”). Set the main switch to position “1”.
The display is off in spite of the
main switch being on position 1
and the electric supply is in order.
Digital control panel defective. Replace the Digital control panel.
Inner light bulb does not switch on. Burned inner light bulb. Replace inner light bulb.
Inner light bulb switch defective. Replace light bulb switch.
No electric supply power on the
light bulb.
Check electric connection with the
light bulb.
The baking chamber does not heat
suitably.
The set temperature are too low. Set the right temperature.
Maintenance
Troubleshooting