Omcan 46321, Инструкция по эксплуатации

Страница: 13 / 44

13
Installation
DRAINAGE CONNECTION
Do not add extension to the drain hose otherwise warranty is void.
Outflow is accomplished by gravity (natural flow) in the CD-GR-1500. The outlet hose should be connected
either directly to a floor drain or drain which must not be higher than the level of the outlet at the rear of the
machine. An open drain connection or one to a vented drain pipe is recommended.
I. Connect the drain hose to the main draining.
II. Connection must be made if the same flow with the draining pipe.
ATTENTION:
• Drain connection to a venting dedicated drain pipe is suggested.
• It is strongly advised NOT to connect the drain hose into the sink’s draining.
• If an extension is added to the drain hose the warranty is voided.
ATTENTION:
• Make sure that no residuals remain to the water supply line before connecting it to the machine.
• Plumbing connections must be made in such way that will allow the machine to be moved for service and
cleaning.
• PRV MUST be installed and adjust at 20 PSI otherwise the warranty is voided.
Min water inlet temp. Operating flow pressure. Min wash temperature. Min rinse temperature.
40°C 20 ±5 PSI 165°F / 74°C 165°F / 74°C
• Connect the PRV valve in the water supply shut off valve.
• Connect the water supply hose to the PRV in one side and in the machine on the other side.
Attention: source water hardness must not intervene 10°F / 6 Gd.