Omcan 45219, Инструкция по эксплуатации, Страница: 21 / 44

21
Maintenance
REGULAR MAINTENANCE AND CLEANING.
Depending on local water hardness, the nozzles on the upper wash
piping and rinse arms should be cleaned. Caution must be exercised
to not damage the nozzles. If rinse nozzles are removed, they must be
replaced with the slot in line with the rinse arm. ATTENTION MUST BE
GIVEN TO THE CORRECT INSTALLATION OF FILTERS, WASH ARMS,
AND TEFLON BUSHINGS! REPLACE BUSHINGS IF WORN. Clean the
appliance with warm water and conventional cleaning aids. Stainless steel
parts should never be cleaned them with “steel wool” wire brush, etc, since
even the lightest contacts on the surfaces with steel may contaminate the
stainless steel and cause rust formation. Use brushes made of polymer
plastic or natural bristles or thin brass wire. Always keep brush movements
in line with grain in the Stainless Steel so that you will not affect the
appearance. Finally, rinse with clean water and dry thoroughly.
We remind you that corrosion (rust formation) on stainless steel surfaces is
not created by itself, but rather due to the use of improper cleaning products
(e.g. whitening or particularly caustic cleaning products based on chlorine).
Occasionally calcium sediments form on the internal walls of the wash
compartment, tubing, and booster chamber (due to mineral particles in the
water), which may affect the correct operation of the appliance and which
requires removal.
SPARE PARTS, ACCESSORIES AND COMPONENTS
Spare parts and components are usually available at the authorized local service agency, or directly from
Omcan, In case of warranty claims or complaints, you must supply the model and serial number of the
appliance found on the specification label of the appliance.