Omcan 44307, Инструкция по эксплуатации

Страница: 11 / 20

11
Maintenance
Troubleshooting
To clean, first remove the power cord’s plug from the wall outlet. Wait for the oven to cool. Use a damp cloth
or sponge to gently wipe down the inside of the oven. Avoid soaking the inside of the oven or washing it in
running water as this will cause serious damage to the unit.
PROBLEM: THE OVEN DOES NOT BECOME HOT AFTER BEING SWITCHED ON.
• Be sure that the timer switch is set.
• Be sure that the temperature control knob is set.
PROBLEM: THERE IS A METALLIC SOUND WHEN THE OVEN IS IN USE.
• Do not attempt to dismantle the oven.
• Contact your service agent right away to examine the fan.
PROBLEM: FOOD IS OFTEN OVERCOOKED OR BURNED, EVEN WHEN COOKED ACCORDING TO
Operation
heating indicator light will be on and the fan motor will begin to operate.
PROTECTION COMPONENT
If the temperature of this oven reaches an unsafe limit, the electrical components will shut off and it will stop
operating in order to prevent overheating.
TYPICAL OPERATION SEQUENCE
Action Result
Plug in your oven. Power is connected but power light will go on after
turning the temperature dial.
Adjust temperature control knob. Heating indicator light comes on; heating elements
begin to heat up.
Temperature light shuts off. Oven has reached desired temperature.
Load product into oven. Product will begin to cook.
Set timer to desired cook time between 0-120 min. Timer starts timing down.
Timer reaches zero. Timer chimes.
Unload oven. Product will be cooked/hot; use caution removing it
from the oven.