Omcan 44226, Инструкция по эксплуатации

Страница: 8 / 12

8
Troubleshooting
Heating being interrupted in normal
use and a “Beep” will be heard.
Incompatible cookware or no
cookware is used?
Replace compatible cookware for
the induction cooker.
Is the cookware not considerably
placed form the center of the
heating zone?
Place the cookware at the center
of the defined heating zone.
Is the cookware being heated but
continually being removed?
Place a cookware inside the
heating zone.
No operation during the heating
being in use.
Is the cookware empty or the
temperature too high?
Please check whether the
appliance is being misused.
Is the air intake/exhaust vent
clogged or dirt has accumulated?
Remove the stuff clogging the
air intake/exhaust vent. Operate
the appliance again after cooling
down.
Is the cooker working over 2 hours
without any external instruction?
Reset cooking modes or use timer
function.
Error codes occur. E0 Internal circuit error. Please contact Omcan for
checking and repairing.
E1 Without cookware or
Incompatible cookware used.
Please check whether the
cookware is not suitable, or switch
on the appliance again after it is
cooled down naturally.
E2 Internal overheat.
E3 Over-voltage. Please contact Omcan for
checking and repairing.
E4 Under-Voltage.
E5 Top plate sensor open/short
circuit.
E6 IGBT sensor open circuit/short
circuit.
E7 Top plate overheat.
Please check whether the
cookware is not suitable, or switch
on the appliance again after it is
cooled down naturally.
If the above remedies/controls can not fix the problem, unplug the appliance immediately, contact Omcan for
inspection and repairing, note the error code and report it to Omcan. To avoid any danger and damage to the
appliance, do not disassemble or repair it by yourself.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
44226 CE-CN-3500
Induction Cooker Commercial Digital
3500 W 240V/60/1 cETLus
JDLC35A1