background image

5

Safety and Warranty

before installing, or servicing this equipment.

WARNING: Instructions must be posted in a prominent location. All safety precautions must be taken 

in the event the user smells gas. Safety information can be obtained from your local gas supplier.

CAUTION: These models are designed, built, and sold for commercial use only. If these models are 

positioned so the general public can use the equipment, make sure that cautions, warnings, and 

operating instructions are clearly posted near each unit so that anyone using the equipment will use it 

correctly and not injure themselves or harm the equipment.

GAS PRESSURE

The appliance and it’s individual shutoff valve (to be supplied by user) must be disconnected from the gas 

supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.45 

kPa).The appliance must be isolated from the gas supply piping system by closing it’s individual manual shut-

off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ 

psi (3.45 kPa).

WARNING: A factory authorized agent should handle all maintenance and repair. Before doing any 

maintenance or repair, contact your authorized service representative.

SAFETY PRECAUTIONS

DANGER: Warns of imminent hazard which will result in serious injury or death.

WARNING: Refers to a potential hazard or unsafe practice, which could result in serious injury or 

death.

CAUTION: Refers to a potential hazard or unsafe practice, which could result in minor or moderate 

injury or product or property damage.

NOTICE: Refers to information that needs special attention or must be fully understood even though 

not dangerous.

NOTICE: This product is intended for commercial use only. Not for household use.

NOTICE: Local codes regarding installation vary greatly from one area to another. The National Fire 

Protection Association, Inc., states in its NFPA96 latest edition that local codes are “Authority Having 

Jurisdiction” when it comes to requirement for installation of equipment. Therefore, installation should 

comply with all local codes.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either 

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the 

equipment.

Содержание 44198

















Отзывы: