6
Technical Specifications
Installation
Take out the contact grill from the packaging and locate the unit on a firm level surface.
When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative
finished, etc., it is recommended that they be made of non-combustible material, if not, they shall be clad with
a suitable non-combustible heat-insulating material, and that the closet attention be paid to fire prevention
regulations.
PROGRAMMABLE TIMER INSTRUCTIONS
Note: Be sure the unit is unplugged and cool prior to installing or removing the programmable timer.
1. Installing the batteries - 2pcs AAA 1.5V battery.
Place your fingers on the two tabs on the sides of the timer and firmly depress and pulling towards you,
the timer is released from the unit, then open battery box cover, install batteries in, then slide battery cover
back into the position. Check timer to ensure power is supplied by pressing “-”. Insert timer into the port
until side tabs lock into place.
2. Programming the timer.
Note: The timer will not automatically shut off your unit. Once your programmed time has lapsed,
the unit will beep 5 times and the screen will go blank.
PROGRAM MANUALLY
To manually program the timer, hold both “-” and “+” at the same time for four seconds. The timer will beep
twice. After the second beep, use the “-” and “+” to scroll to your desired time setting up to 19:59. For fast
scroll, hold the button down until you have reached your desired time setting. The timer will automatically
Model
PG-CN-0711-FT
Grill Surface
10” x 18” / 254 x 457mm
Thermostat Control
60 - 300°C / 140 - 572°F
Power
3200W
Electrical
220V / 60Hz / 1
Top Grill
Smooth
Bottom Grill
Smooth
Dimensions
19” x 15.4” x 10” / 483 x 391 x 254mm
Packaging Dimensions
20” x 23” x 14” / 508 x 584 x 356mm
Weight
70 lbs. / 31.8 kgs.
Packaging Weight
72.6 lbs. / 32.9 kgs.
Item Number
42913
