Omcan 37864, Инструкция по эксплуатации

Страница: 17 / 24

17
Troubleshooting
The cubes are partially
formed--have ragged
sides
Water quality The water quality is poor. Use a water-soften / filter
apparatus installed in
front of the water inlet
valve.
Evaporator Ice machine is dirty. Clean and sanitize the ice
machine.
Water distribution tube The water distribution
tube is partially blocked.
Clean the water
distribution tube.
The room temperature The room temperature is
out of the stated range,
the water pump stops.
Make the temperature
return within the stated
range.
The ice cubes have
shape deformities
Filter Water filtration element
needs to be changed.
Replace the filter.
Water trough Water trough level is too
low.
Adjust the water floater.
Cubes are partially
formed—are white at the
bottom
The room temperature The room temperature
is out the stated range,
the water pump stops
automatically.
Make the temperature
return within the stated
range.
Water trough Water trough level is too
low.
Adjust the water floater.
OTHER PROBLEMS
Problem Check part or point Possible Cause Probable Correction
The body is electrified Ground line The ground line isn't in
the socket.
Please use the socket
meeting the standard.
Lines The lines are not
insulated.
Adjust, reconnect /
replace lines
Electric component The electric component is
not insulated.
Replace this electric
component.
Scales occur frequently
inside the machine
The water quality The rigidity of the water
quality is too high.
Use a water-soften
apparatus installed in
front of the water inlet.